Caterpillar 950M Wheel Loader
Dimensions
Dimensions
Ground Clearance
1.17ft in
Hinge Pin Height At Carry Height
25in
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Height - Top Of Hood
106in
Height - Top Of Rops
7.67ft in
Centerline Of Rear Axle To Edge Of Counterweight
76in
Overall Length (Without Bucket)
272in
Wheel Base
11ft in
Centerline Of Rear Axle To Hitch
66in
Maximum Width Over Tires (Loaded)
111in
Height - Top Of Exhaust Pipe
90in
Hinge Pin Height At Maximum Lift
159in
Tread Width
84in
Dimensions - High Lift
Ground Clearance
1.17ft in
Rack Back - Carry Height
49 degrees
Centerline Of Rear Axle To Edge Of Counterweight
6.33ft in
Centerline Of Rear Axle To Hitch
5.5ft in
Height - Top Of Exhaust Pipe
11.17ft in
Height - Top Of Hood
8.83ft in
Height - Top Of Rops
11.33ft in
Hinge Pin Height At Carry Height
2.58ft in
Hinge Pin Height At Maximum Lift
14.83ft in
Lift Arm Clearance At Maximum Lift
11.92ft in
Maximum Width - Over Tires - Loaded
9.25ft in
Overall Length - Without Bucket
24.58ft in
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Rack Back - Maximum Lift
59 degrees
Rack Back At Ground
40 degrees
Tread Width
7ft in
Wheel Base
11ft in
Dimensions - Standard Lift
Ground Clearance
1.17ft in
Overall Length - Without Bucket
22.67ft in
Tread Width
7ft in
Centerline Of Rear Axle To Hitch
5.5ft in
Rack Back - Carry Height
49 degrees
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Height - Top Of Rops
11.33ft in
Hinge Pin Height At Carry Height
2.08ft in
Rack Back - Maximum Lift
59 degrees
Height - Top Of Hood
8.83ft in
Hinge Pin Height At Maximum Lift
13.25ft in
Centerline Of Rear Axle To Edge Of Counterweight
6.33ft in
Height - Top Of Exhaust Pipe
11.17ft in
Rack Back At Ground
36 degrees
Lift Arm Clearance At Maximum Lift
10.75ft in
Wheel Base
11ft in
Maximum Width - Over Tires - Loaded
9.25ft in
Specifications
Engine
Displacement
428cu in
Bore
4.2in
Stroke
5.4in
Net Power - Iso 9249
230hp
Engine Model
Cat C7.1 ACERT
Peak Gross Torque - 1,400 Rpm - Sae J1995
777lb ft
Maximum Net Torque - 1,400 Rpm
726lb ft
Maximum Net Power - 2,000 Rpm - Sae J1349
248hp
Maximum Net Power - 2,000 Rpm - Iso 9249
248hp
Maximum Net Power - 2,000 Rpm - Iso 9249 - Metric
252hp
Peak Gross Torque - 1,400 Rpm - Iso 14396
774lb ft
Maximum Power - 2,000 Rpm - Sae J1995
263hp
Maximum Power - 2,000 Rpm - Iso 14396
261hp
Maximum Power - 2,000 Rpm - Iso 14396 - Metric
265hp
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Peak Gross Torque - 1,300 Rpm - Sae J1995
911lb ft
Maximum Gross Power - Sae J1995
250hp
Maximum Net Power - Sae J1349
230hp
Maximum Gross Power - 2,100 Rpm - Sae J1995
250hp
Maximum Net Power - 2,100 Rpm - Sae J1349
230hp
Maximum Net Torque - 1,300 Rpm - Sae J1349
858lb ft
Peak Gross Torque - 1,300 Rpm - Iso 14396
908lb ft
Maximum Net Power - 2,100 Rpm - Iso 9249 - Metric
232hp
Maximum Net Power - 2,100 Rpm - Iso 9249
230hp
Maximum Power - 2,100 Rpm - Sae J1995
250hp
Maximum Power - 2,100 Rpm - Iso 14396
249hp
Maximum Power - 2,100 Rpm - Iso 14396 - Metric
253hp
Maximum Net Torque - 1,300 Rpm
858lb ft
Operational
Operating Weight
42360lb
Transmission
Forward - 1
4.3mph
Forward - 2
7.5mph
Forward - 3
12mph
Forward - 4
16mph
Forward - 5
24.5mph
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Reverse - 1
4.3mph
Reverse - 2
7.5mph
Reverse - 3
16mph
Weights
Operating Weight
42357lb
Note
Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.1 m3 (4.1 yd3) general purpose bucket with BOCE.
Buckets
Bucket Capacities
2.5-9.2 m (3.3-12.0 yd)
Axles
Front
Fixed
Rear
Oscillating ?13 degrees
Maximum Single-Wheel Rise And Fall
19.2in
Hydraulic System
Hydraulic Cycle Time - Total
8.9 s
Implement System - Maximum Operating Pressure
4250 psi
Implement System - Maximum Pump Output At 2,150 Rpm
76 gal/min
Implement Pump Type
Variable Axial Piston
Implement System - Optional 3rd Function Maximum Flow
63 gal/min
Implement System - Optional 3rd Function Maximum Pressure
3220 psi
Hydraulic Cycle Time - Rated Payload - Raise From Carry Position
5.1 s
Hydraulic Cycle Time - Rated Payload - Dump, At Maximum Raise
1.5 s
Hydraulic Cycle Time - Rated Payload - Lower, Empty, Float Down
2.3 s
Hydraulic Cycle Time - Rated Payload - Total
8.9 s
Brakes
Brakes
Brakes meet ISO 3450 standards
Operating Specifications
Note (1)
For a machine configuration as defined under ?Weight.?
Note (2)
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Breakout Force
40690lb
Static Tipping Load - Full 40 Degrees Turn - With Tire Deflection
24262lb
Static Tipping Load - Full 40 Degrees Turn - No Tire Deflection
25926lb
Service Refill Capacities
Cooling System
15.6gal
Fuel Tank
72.6gal
Crankcase
5.8gal
Def Tank
4.2gal
Hydraulic Tank
33gal
Transmission
11.4gal
Differential - Final Drives - Front
11.4gal
Differential - Final Drives - Rear
11.4gal
Note
*Must meet the requirements outlined in ISO 22241-1.
Def Tank*
4.2gal
Sound
Note (1)
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Note (2)
**For machines in European Union countries and in countries that adopt the ?EU Directives.?
Note (3)
***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
Note
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed At Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)
70 dB(A)
With Cooling Fan Speed At Maximum Value - Exterior Sound Power Level (Iso 6395:2008)
107 dB(A)
With Cooling Fan Speed At Maximum Value - Exterior Sound Pressure Level (Sae J88:2013)
75 dB(A)*
With Cooling Fan Speed At 70% Of Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)**
69 dB(A)
With Cooling Fan Speed At 70% Of Maximum Value - Exterior Sound Power Level (Iso 6395:2008)**
104 LWA***
Exterior Sound Power Level - Iso 6395:2008
108 dB(A)
Exterior Sound Pressure Level - Sae J88:2013
75 dB(A)
Operator Sound Pressure Level - Iso 6396:2008
70 dB(A)
Cab
Rops/Fops
ROPS/FOPS meet ISO 3471 and ISO 3449 Level II standards
Bucket Capacities
Bucket Range
2.5-9.2 m (3.3-12.0 yd)
Engine - Tier 4 Final/Stage Iv
Emissions
Tier 4/Stage IV
