Caterpillar 908 Wheel Loader
Dimensions
Bucket
Dump Clearance At Max Raise
10.33ft in
Bucket Capacity - Heaped
0.8yd3
Bucket Width
6.75ft in
Breakout Force
13710lb
Dimensions
Length With Bucket On Ground
17.43ft in
Width Over Tires
6.42ft in
Height To Top Of Cab
9.08ft in
Wheelbase
7.25ft in
Hinge Pin - Max Height
11.08ft in
Tread Width
62.4in
Specifications
Engine
Net Power
76hp
Gross Power
84hp
Iso 9249 Rating
80hp
Eec 80/1269 Rating
80hp
Sae J1349 Rating
80hp
Operational
Operating Weight
13288lb
Fuel Capacity
21gal
Hydraulic System Fluid Capacity
17gal
Engine Oil Fluid Capacity
2.6gal
Cooling System Fluid Capacity
5.8gal
Transmission Fluid Capacity
2.6gal
Static Tipping Weight
9636lb
Operating Voltage
12V
Alternator Supplied Amperage
90amps
Rear Axle Oscillation
22degrees
Tire Size
12.5-18
Transmission
Transmission Type
Hydrostatic
Number Of Forward Gears
2
Number Of Reverse Gears
2
Max Speed - Forward
12mph
Max Speed - Reverse
12mph
Weights
Operating Weight
13288lb
Buckets
Bucket Width
6.9ft in
Hydraulic System
Relief Valve Setting
3400psi
Pump Flow Capacity
15.9gal/min
Raise Time
4.5sec
Dump Time
2.4sec
Lower Time
3.2sec
Pump Type
Gear
Hydraulic Cycle Time - Dump
2.4
Hydraulic Cycle Time - Lift
4.5
Main Relief
3400 psi
Hydraulic Cycle Time - Lower, Float
3.2
3rd Valve Flow
21.6 gal/min
Pressure Flow At 2,600 Rpm And 70 Bar (1,000 Psi)
15.9 gal/min
Operating Specifications
Breakout Force
13710lb
Rated Bucket Capacity
1.3yd3
Dump Height At Full Lift
10.4ft in
Articulation
40degrees
Oscillation +/-
11degrees
Full Turn Static Tipping Load - Bucket
8270lb
Rack Back - Transport Position
56degrees
Rated Operating Load At Full Turn - Bucket
4136lb
Hydraulic Lift Capacity
9900lb
Straight Tipping Load - Bucket
9636lb
Reach - Without Teeth
2.8ft in
Rated Operating Load At Full Turn - Forks
5291lb
Full Turn Static Tipping Load - Forks
6860lb
Service Refill Capacities
Cooling System
5.8gal
Fuel Tank
21gal
Hydraulic System
17gal
Engine Oil
2.6gal
Cab
Rops
meets the following criteria: SAE J1040 MAY94, ISO 3471-1:1986
Fops
meets the following criteria: SAE J231 JAN81, ISO 3449:1992
Sound
Sound level is below 75 dB(A)
Maximum Material Densities
General Purpose Bucket - 0.6 M3 (0.8 Yd3)
3760 lb/yd
Multi Purpose Bucket - 0.6 M3 (0.8 Yd3)
3300 lb/yd
Light Material - Bucket 1.0 M3 (1.3 Yd3)
1675 lb/yd
Side Dump Bucket
3105 lb/yd
High Dump Bucket - 0.7 M3 (0.8 Yd3)
3230 lb/yd
Stone Sieve Bucket - 0.6 M3 (0.8 Yd3)
3380 lb/yd
Engine Dimensions
Bore
3.7in
Stroke
4.8in
Power Train, Axles And Brakes
Transmission Type
Closed-loop, two-speed hydrostatic single-path transmission.
Maximum Travel Speeds - With 12.5-18 Tires, Forward And Reverse, Low
4mph
Maximum Travel Speeds - Forward And Reverse, High
12mph
Axle And Final Drives
fixed front axle with limited slip differential and planetary ge
Service And Parking Brake
Are combined in a single, dry-disc driveline brake
Brake Standards
Brake meets ISO 3450:1996
