John Deere 953K Feller Buncher
Dimensions
Dimensions
Tail Swing Radius
10.6ft in
Overall Machine Length*
251.5in
Overall Machine Width Without Bucket: Narrow Tracks - 380 Mm (14.9 In) Shoes
87.2in
Overall Machine Width Without Bucket: Standard Tracks - 480 Mm (19.7 In) Shoes
91.2in
Ramp Angle
29 degrees
Reach At Full Lift Height And 45 Degrees Dump*
47in
Maximum Rollback/Dump - Fully Raised
52 degrees/53 degrees
Overall Machine Height - Bucket Fully Raised
183.7in
Bucket Height - Carry Position
21.6in
Carry Position Approach Angle
15 degrees
Clearance At Full Lift Height And 45 Degrees Dump*
106in
Digging Depth*
5.5in
Grading Angle
74 degrees
Note
*With general purpose bucket and extra duty teeth.
Height - Bucket Hinge Pin
142.1in
Height - Top Of Stack
110.3in
Machine Height - Top Of Cab
124.2in
Maximum Rollback - Ground/Carry Position
43 degrees/50 degrees
Undercarriage
Track Gauge
6.03ft in
Track Shoe Width - Standard
18.9in
Ground Contact Area - Optional Shoe
2790in2
Ground Contact Area - Standard Shoe
3410in2
Ground Pressure - Optional Shoe
10.9 psi
Ground Pressure - Standard Shoe
8.6 psi
Ground Pressure(1) - Optional Shoe
11.1 psi
Ground Pressure(1) - Standard Shoe
8.8 psi
Grouser Height - Double Grouser
1.4in
Track On Ground
91.3in
Track Rollers/Shoes - Each Side
Jun-37
Track Shoe Width - Optional
14.9in
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Specifications
Engine
Number Of Cylinders
6
Engine Make
2240
Engine Model
PowerTech Plus 6090H
Gross Power
330hp
Net Power
286hp
Net Torque
1026.7lb ft
Displacement
549cu in
Emissions
U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final or China Nonroad Stage III, India Bharat III, Eurasian Economic Union Stage IIIA, UN ECE R96 Stage IIIA emission standards, equivalent to Tier 3/Stage IIIA
Engine Model
Cat C7.1 ACERT
Flywheel Power
154hp
Note (1)
All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Net Power - Rated - Iso 9249 (Din)
156hp
Net Power (Rated) - Sae J1349/Iso 9249
154hp
Operational
Operating Weight
33852lb
Fuel Capacity
295gal
Hydraulic System Fluid Capacity
82gal
Swing Speed
6rpm
Operating Voltage
24V
Max Speed
1.2mph
Weights
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Operating Weight(1)
34484lb
Buckets
Capacity - General Purpose
2.4yd3
Capacity - Multi-Purpose
2.1yd3
Capacity - Performance Series
2.5yd3
Width - General Purpose
97.8in
Width - Performance Series
99.8in
Width - Multi-Purpose
97.3in
Note
Buckets equipped with teeth and segments.
Service Refill Capacities
Fuel Tank
70gal
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Def Tank(1)
4.2gal
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes.
General
Note
For complete machine specifications and available configurations, please see your Cat dealer or look on this website.
