Caterpillar 725C2 Articulated Dump Truck
Dimensions
Dump
Rated Payload
58422.43lb
Specifications
Engine
Displacement
567cu in
Bore
4.6in
Stroke
5.9in
Emissions
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
Net Power - Sae J1349
314hp
Gross Power - Sae J1995
320hp
Engine Model
Cat C9.3 ACERT
Net Power - Iso 14396
316hp
Note (1)
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (3)
Net power when the fan is at maximum speed is 214 kW (287 hp) per the SAE reference conditions.
Note (4)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Peak Engine Torque Gross (Sae J1995)
1275lb ft
Peak Engine Torque Speed
1200rpm
Engine Model - U.S. Epa Tier 4 Final/Eu Stage Iv
Cat C9.3 ACERT
Peak Engine Torque Net (Sae J1349)
1262lb ft
No Engine De-Rating Below
7500ft in
Transmission
Forward - 1
5mph
Forward - 2
9mph
Forward - 3
14mph
Forward - 4
21mph
Forward - 5
29mph
Forward - 6
36mph
Reverse - 1
6mph
Steering
Lock To Lock
4.75 seconds @ 60 rpm
Service Refill Capacities
Cooling System
21.9gal
Fuel Tank
108.8gal
Def Tank
5.3gal
Engine Crankcase
10gal
Transmission
12.4gal
Hydraulic System
29.1gal
Final Drives/Differential
33gal
Output Transfer Gear Box
6.3gal
Standards
Cab - Fops
ISO 3449 Level II 2005
Cab - Rops
ISO 3471 2008
Brakes
ISO 3450 2011
Steering
ISO 5010 2007
Operating Weights
Front Axle - Empty
31835lb
Center Axle - Empty
9755lb
Rear Axle - Empty
9205lb
Total - Empty
50795lb
Front Axle - Rated Load
5512lb
Center Axle - Rated Load
23700lb
Rear Axle - Rated Load
23700lb
Total - Rated Load
52912lb
Front Axle - Loaded
37374lb
Center Axle - Loaded
33455lb
Rear Axle - Loaded
32905lb
Total - Loaded
103707lb
Sound Levels
Interior Cab
76 dB(A)
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Turning Circle
Note
Dimensions are for machines equipped with 23.5R25 tires.
Turning Dimensions - Sae Turning Radius
294in
Turning Dimensions - Clearance Radius
318in
Turning Dimensions - Inside Radius
153in
Turning Dimensions - Aisle Width
210in
Body Capacities
Heaped (Sae 2:1)
19.6yd3
Struck
14.4yd3
Tailgate Struck
14.5yd3
Tailgate Heaped Sae 2:1
20.4yd3
Body Hoist
Raise Time
10 s
Lower Time
8 s
Body Plate
Body Plate Type
High strength Brinell HB450 wear resistant steel
