Caterpillar 725C (Tier 4, Stage IV) Articulated Dump Truck
Units
Dimensions
Dump
Rated Payload
57320.12lb
Specifications
Engine
Displacement
567cu in
Bore
4.6in
Stroke
5.9in
Net Power - Sae J1349
314hp
Gross Power - Sae J1995
320hp
Engine Model
Cat C9.3 ACERT
Net Power - Iso 14396
316hp
No Engine De-Rating Required Below
8400ft in
Peak Engine Torque Gross (Sae J1995)
1275lb ft
Peak Engine Torque Net (Iso 14396)
1263lb ft
Peak Engine Torque Speed
1200rpm
Engine Model - U.S. Epa Tier 4 Final/Eu Stage Iv
Cat C9.3 ACERT
Transmission
Forward - 1
5mph
Forward - 2
9mph
Forward - 3
14mph
Forward - 4
21mph
Forward - 5
30mph
Forward - 6
35mph
Reverse - 1
6mph
Steering
Lock To Lock
4.75 seconds @ 60 rpm
Service Refill Capacities
Cooling System
21.9gal
Fuel Tank
108.8gal
Engine Crankcase
10gal
Transmission
12.4gal
Hydraulic System
29.1gal
Final Drives/Differential
35.7gal
Output Transfer Gear Box
6.3gal
Def Tank (Iso 2224-1)
5.3gal
Standards
Cab - Fops
ISO 3449 Level II - 2005
Cab - Rops
ISO 3471 - 2008
Brakes
ISO 3450 - 2011
Steering
ISO 5010 - 2007
Operating Weights
Front Axle - Empty
31813lb
Center Axle - Empty
10030lb
Rear Axle - Empty
9348lb
Total - Empty
51191lb
Front Axle - Rated Load
5423lb
Center Axle - Rated Load
23303lb
Rear Axle - Rated Load
23303lb
Total - Rated Load
52029lb
Front Axle - Loaded
37236lb
Center Axle - Loaded
33333lb
Rear Axle - Loaded
32651lb
Total - Loaded
103220lb
Sound Levels
Interior Cab
76 dB(A)
Turning Circle
Note
Dimensions are for machines equipped with 23.5R25 tires.
Turning Dimensions - Steer Angle - Left/Right
45degrees
Turning Dimensions - Sae Turning Radius
294in
Turning Dimensions - Clearance Radius
318in
Turning Dimensions - Inside Radius
153in
Turning Dimensions - Aisle Width
210in
Body Capacities
Heaped (Sae 2:1)
19.6yd3
Struck
14.4yd3
Tailgate Struck
14.5yd3
Tailgate Heaped Sae 2:1
20.4yd3
Body Hoist
Raise Time
10 s
Lower Time
8 s
Body Plate
Body Plate Type
High Strength Brinell HB450 Wear Resistant Steel
