John Deere Row-Crop Tractors _ 8245R _ JD MFWD Tractor
Dimensions
Dimensions
Approx. Ship Wgt, Lb (Kg) Open; Cab
MFWD/PST with 625-kg (1378-lb) inner weights, front weight support, Cat3 hitch with QC, 113.6 L (30 gal.) fuel, 480/80R46 rear duals, 420/90R30 fronts: 12,680 kg; 27,953 lb ILS/IVT with 625-kg (1378-lb) inner weights,front weight support, Cat4 hitch with QC, 113.6 L (30 gal.) fuel, 480/80R50 rear duals, 420/85R34 front duals: 15,009 kg; 33,091 lb.MFWD/PST with: Inner weights: 625 kg 1378 lb front weight support/Cat3 hitch with QC/Fuel 113.6 L 30 gal. 480/80R46 duals/420/90R30 fronts 12,498 kg 27,553 lb
Front Axle Clearance, In. (Mm)
1300 MFWD: 1524-2235 mm 60-88 in. 1500 MFWD/ILS: 1524-3657 mm 60-144 in.MFWD: 686 mm 27 in. ILS: 590 mm 23.2 in.
Limited Slip Differential
Limited slip or hydraulic lock differential available
Wheelbase, In. (Mm)
MFWD: 3080 mm 121.3 in. ILS: 3050 mm 120.1 in.
Specifications
Engine
Engine Manufacturer
John Deere
Family
9.0L: EJDXL09.0301
Cylinder Liners
Wet
Fuel Tank Capacity
Standard With G47/48 tires: 645 L 170.4 U.S. gal. With G49 tires: 686 L 181.2 U.S. gal.
Displacement
6 cylinders/9.0 L 549 cu in.
Aspiration
Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
Power Take-Off(Pto)
Standard
45 mm (1.75 in.), 20 spline, 1000 rpm
Optional
\"45 mm (1.75 in.), 20 spline, 1000 rpm and 1000E economy rpm, in-cab shiftable 45 mm (1.75 in.), 20 spline, 1000 rpm, capable of 35 mm (1.375 in.), 6/21 spline, 540/1000 rpm\"
Pto Actuation
Electrohydraulic
Pto Speeds @ Engine Rpm
16-speed PowerShift: 1000 PTO rpm @ 2003 engine rpm, 1000 ECO PTO rpm @ 1596 engine rpm, and 540 PTO rpm @ 1817 engine rpm IVT: 1000 PTO rpm @ 2000 engine rpm, 1000 ECO PTO @ 1594 engine rpm, and 540 PTO rpm @ 1814 engine rpm e23: 1000 PTO rpm @ 1995 engine rpm, 1000 ECO PTO @ 1590 engine rpm, and 540 PTO rpm @ 1810 engine rpm
Performance
Advertised Pto
\"At @ 2100 per SAE: 149 PTO hp 200 hp\"
Advertised Engine Hp (Kw) @ Rated Speed
\"At 2100 per 97/68EC PS: 180 kW 245 hp\"
Transmission
Creeper
IVT
Reverser
Left-hand or Right-hand (PowerShift RH only)
On-The-Go Shifting (Yes/No/Partial)
Yes
Std. Transmission; Forward/Reverse
16-speed PowerShift; 16/5
Opt. Transmission; Forward/Reverse
e23; 23/11 (42 or 50) km/h
Clutch; Wet/Dry
Wet
Tires
Mfwd
Front 420/90R30Rear 480/80R46
Hydraulic
Remote Control Valves Available
Standard: four Optional: five or six 2 Front SCV option
Hitch Draft Control Load Sense Type
Electronic
Hitch Lift Cap
Standard Cat 3/3N: 6350 kg 14,000 lbOptional Cat 3/3N: 8391 kg 18,500 lb Cat 4N/3: 9072 kg 20,000 lb
Sensing Type
Electrohydraulic
Joystick Scv Control
Electrohydraulic optional
Hydraulic Type
Closed-center, pressure/flow compensated
Hitch Category (Sae Designation)
Standard: Cat 3/3N Optional: Cat 4N/3
Pump Rated Output, Gpm (L/Min.)
Standard 227.1 L/min 60 gpmOptional 321 L/min 85 gpm
Maximum Operating Pressure, Psi (Kpa)
20,400 (+ or - 300) kPa 2958 psi
Rated Flow @ One Scv, Gpm (L/Min.) 1
Rear: 0.5 in. SCV: 132 L/min 35 gpm Rear: 0.75 in. SCV: 153 L/min 40.5 gpm Front SCV: 96 L/min 25 gpm
Final Drive
Final Drive Type
Inboard planetary
Differential Controls
Electrohydraulic
Availability
Front YesFront & Rear Yes Yes
Engage On-The-Go Rear Differential Lock
Yes
Axle Type
Bar axle, rack and pinion
Brakes, Type And Control
Hydraulic wet disc
Operator Station
Cab
Doors LHPlatform - Flat/Straddle FlatSeat Suspension System Standard: air Optional: active seat Optional: Cab suspension with air seat
Rollover Protective Structure, Oos
Gearshift Location - Console/Floor CommandARM
