John Deere 9520RX Scraper Special 4WD Tractor
Specifications
Engine
Engine Manufacturer
John Deere PowerTech™ PSS 13.5L
Compression Ratio
16:0:1
Rated Power
520hp
Displacement
824cu in
Torque Rise
38%
Max Power
572hp
Aspiration
Dual series turbocharger w/fixed geometry first stage-variable geometry second stage - air-toair aftercooling and cooled exhaust gas recirculation
Rated Pto Power
335hp
Power Boost (Available In Transport And/Or Mobile Pto Applications)
10 percent
Bore And Stroke
5.2 in. (132 mm) x 6.5 in. (165 mm)
Capacities
Fuel Tank - Diesel
400gal
Crankcase Oil Volume
12.7gal
Def Tank
22gal
Cooling System
14.9gal
Hydraulic/Transmission/Axle Oil Without 3-Point Rear Hitch And Pto
58gal
Hydraulic/Transmission/Axle Oil With 3-Point Rear Hitch And Pto
60gal
Electrical
Alternator (12-V)
200 amps / 12 Volt – 240 amps / 12 Volt optional
Battery
925 CCA-3
Fuel System
Description
Electronically controlled, electronic unit injectors (self priming)
Filter Primary
10 micron replaceable cartridge w/water indication sensor and drain
Filter Secondary
2 micron spin-on element
Filter System
Two Stage with water separator and service indicator light
Steering
Hydraulic Power-Steering
Standard
Active Command Steering (Acs)
Available
Transmission
Description
e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™
Hydraulic
Maximum Operating Pressure
2900psi
Scv Control
4 - 6 factory, up to 8 field installed
Axles
Description
Bull gear and double idler with floating pinion.
120 Mm Flanged
Standard
Rear Axle Supports
Available (included with 3 point hitch)
Front Axle Supports
Available (with sprayer tanks or dozer blade)
Wheelbase Option (Cct) 1
Wheelbase Length
4154in
Turning Radius
21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models
Hydraulic
Maximum Pump Flow With Base Hydraulics
58gal/min
Maximum Pump Flow: High-Flow
115gal/min
Available Flow At A Single Scv - 1 /2 In Coupler
35gal/min
Available Flow At A Single Scv With High-Flow - 3 /4 In Coupler
42gal/min
Description
Closed-center, pressure/flow compensated
3-Point Hitch
Description
Electric-Hydraulic 3-Point Hitch with Draft Sensing
Category 4n/3 With Quik-Coupler
Available: 15000 lb (6804 kg) , Available: 20000 lb (9072 kg) , Available: 15000 lb (6804 kg), Available: 20000 lb (9072 kg)
