John Deere 9470RX Scraper Special 4WD Tractor
Specifications
Engine
Engine Manufacturer
John Deere PowerTech™ PSS 13.5L
Compression Ratio
16:0:1
Rated Power
470hp
Displacement
824cu in
Torque Rise
38%
Max Power
517hp
Aspiration
Dual series turbocharger w/fixed geometry first stage-variable geometry second stage - air-toair aftercooling and cooled exhaust gas recirculation
Rated Pto Power
335hp
Power Boost (Available In Transport And/Or Mobile Pto Applications)
10 percent
Bore And Stroke
5.2 in. (132 mm) x 6.5 in. (165 mm
Capacities
Fuel Tank - Diesel
400gal
Crankcase Oil Volume
12.7gal
Def Tank
22gal
Cooling System
14.9gal
Hydraulic/Transmission/Axle Oil Without 3-Point Rear Hitch And Pto
58gal
Hydraulic/Transmission/Axle Oil With 3-Point Rear Hitch And Pto
60gal
Electrical
Alternator (12-V)
200 amps / 12 Volt – 240 amps / 12 Volt optional
Battery
925 CCA-3
Fuel System
Description
Electronically controlled, electronic unit injectors (self priming)
Filter Primary
10 micron replaceable cartridge w/water indication sensor and drain
Filter Secondary
2 micron spin-on element
Filter System
Two Stage with water separator and service indicator light
Steering
Hydraulic Power-Steering
Standard
Active Command Steering (Acs)
Available
Transmission
Description
e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™
Hydraulic
Maximum Operating Pressure
2900psi
Scv Control
4 - 6 factory, up to 8 field installed
Axles
Description
Bull gear and double idler with floating pinion.
120 Mm Flanged
Standard
Rear Axle Supports
Available (with 30 or 36 in. tracks)
Front Axle Supports
Available (with sprayer tanks or dozer blade)
Wheelbase Option (Cct) 1
Wheelbase Length
4154in
Turning Radius
21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models
Hydraulic
Maximum Pump Flow With Base Hydraulics
58gal/min
Maximum Pump Flow: High-Flow
115gal/min
Available Flow At A Single Scv - 1 /2 In Coupler
35gal/min
Available Flow At A Single Scv With High-Flow - 3 /4 In Coupler
42gal/min
Description
Closed-center, pressure/flow compensated
3-Point Hitch
Description
Electric-Hydraulic 3-Point Hitch with Draft Sensing
Category 4n/3 With Quik-Coupler
Available: 15000 lb (6804 kg) , Available: 20000 lb (9072 kg) , Available: 15000 lb (6804 kg), Available: 20000 lb (9072 kg)
