John Deere 8345R MFWD Tractor
Dimensions
Dimensions
Wheelbase
\"MFWD: 3080 mm 121.3 in. ILS: 3050 mm 120.1 in.\"
Approximate Shipping Weight (Open-Station; Cab)
\\\"ILS/IVT with 625-kg (1378-lb) inner weights,front weight support, Cat4 hitch with QC, 113.6 L (30 gal.) fuel, 480/80R50 rear duals, 420/85R34 front duals: 15,009 kg 33,091 lb\\\", \"ILS/IVT with: Inner weights: 625 kg 1378 lb front weight support/Cat4 hitch with QC/Fuel 113.6 L 30 U.S. gal. 480/80R50 duals/420/85R34 front duals 14,828 kg 32,691 lb\"
Front Axle Clearance, In. (Mm)
\"MFWD: 696 mm 27 in. ILS: 590 mm 23.2 in.\"
Front Tread Range
\"1500 MFWD/ILS: 1524-3657 mm 60-144 in.\"
Limited Slip Differential
Hydraulic lock differential
Specifications
Engine
Number Of Cylinders
6
Engine Manufacturer
John Deere
Family
9.0L: EJDXL09.0301
Cylinder Liners
Wet
Fuel Tank Capacity
200gal
Displacement
549cu in
Aspiration
Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
Power Take-Off(Pto)
Standard
\"45 mm 1.75 in. 20 spline, 1000 rpm\"
Pto Actuation
Electro-hydraulic
Pto Speeds @ Engine Rpm
At 2000 rpm: 1000 rpm
Performance
Advertised Pto
264hp
Advertised Engine
320hp
Transmission
Standard Transmission; Forward/Reverse
IVT
Clutch, Wet/Dry
Wet
Creeper
IVT
Reverser
Left-hand or Right-hand (LH only with CommandQuad Eco)
On-The-Go Shifting (Yes/No/Partial)
Yes
Opt. Transmission; Forward/Reverse
IVT
Tires
Track Widths
\"Standard: 635 mm 25 in. Optional: 406 mm 16 in. 457 mm 18 in. 610 mm 24 in. 762 mm 30 in.\"
Hydraulic
Maximum Operating Pressure
2958psi
Remote Control Valves Available
\"Standard: four Optional: five or six\"
Hitch Draft Control Load Sense Type
Electronic
Sensing Type
Electro-hydraulic
Joystick Scv Control
Electro-hydraulic optional
Hydraulic Type
Closed-center, pressure/flow compensated
Pump Rated Output
\"Standard 227.1 L/min 60 gpmOptional 321 L/min 85 gpm\"
Hitch Lift Cap. Lb (Kg) @24 In. Bhnd Lift Pt.
\"Standard Cat 4N/3: 6803 kg 15000 lbOptional Cat 4N/3: 9,702 kg 20,000 lb\"
Hitch Category (Sae Designation)
Cat 3/3N
Rated Flow @ One Scv, Gpm (L/Min.) 1
\"Rear coupler: 12.7 mm 0.5 in. 132 L/min 35 gpm Rear coupler: 19.1 mm 0.75 in. 153 L/min 40.5 gpm\"
Final Drive
Final Drive Type
Inboard planetary
Differential Controls
Electro-hydraulic
Engage On-The-Go Rear Differential Lock
Yes
Axle Type
Bar
Brakes, Type And Control
Hydraulic wet disc
Operator Station
Rollover Protective Structure
\"Gearshift Location - Console/Floor CommandARM\"
Cab
\"Doors LHPlatform - Flat/Straddle FlatSeat Suspension System Air std. Active Seat (optional) Cab suspension with Air Seat (optional)\"
