John Deere 7310R MFWD Tractor
Specifications
Wheelbase
Mfwd Axle Ground Clearance With Standard Mfwd Tyres
19.5in
Mfwd
115.2in
Engine
Rated Engine Speed
2,100 rpm
Compression Ratio
16.0:1
Lubrication
Full-pressure, full-flow filtration with bypass
Pto Power
260hp
Pto Torque Rise
40%
Displacement
549cu in
Max Power
341hp
Aspiration
Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
Description
John Deere PowerTech PSS 9.0L Engine: B20 Diesel Compatible, in-line, 6-cylinder, wet-sleeve with 4 valves-in-head
Oil Filter
Replaceable cartridge-style
Power Boost (Available In Transport And/Or Mobile Pto Applications)
10%
Bore And Stroke
4.66 in. (118 mm) x 5.35 in. (136 mm)
Filter, Engine Air
Dual stage
Electrical
Description
Two batteries in parallel
Alternator/Battery
Standard: 200 amps/12 Volt Available: 240 amps/12 Volt
Fuel System
Fuel Tank Capacity
Fuel-tank capacity PST, G47/48 475L (125 gal) Fuel-tank capacity IVT, G47/48 520L (137 gal.) Fuel-tank capacity PST, G49 — 497L (131 gal) Fuel-tank capacity IVT, G49 — 543L (143 gal)
Description
Electronically controlled, high-pressure common-rail with electric fuel transfer pump (self priming)
Filter Primary
10 micron replaceable cartridge with water indication sensor and drain
Filter Secondary
2 micron spin-on element
Filter System
Two-stage with water separator and service-indicator light
Def Tank Capacity
6gal
Required Fuel Type
Ultralow sulfur diesel (B20 diesel compatible)
Power Take-Off(Pto)
Pto Speeds @ Engine Rpm
Rear Independent- 540/1,000 at 1,950 engine rpm; 540E/1,000E PTO at 1,750 engine rpm . Front Independent- PTO Speed at engine RPM (1:2 ratio) 1,000 PTO rpm at 1,940E rpm WHEELBASE
Steering
Hydraulic Power-Steering
Standard: Load Sensing, Hydrostatic, Flow Metering with a 406mm diameter steering wheel
Active Command Steering (Acs)
Available: Variable ratio 15:1 to 23:1 (3.1-5.0 turns lock to lock) w/Stability Augmentation and passive tactile feedback-345mm diameter steering wheel HYDRAULIC SYSTEM
Transmission
E23 Transmission 50k, 31 Mph (50 Km/H
Standard 50 kph @ 1900 rpm w/grp 48 tires, 50kph @ 1800 rpm w/grp 49 tires)
John Deere Infinitely Variable Transmission (Ivt), 26 Mph (40 Km/H
Available
John Deere Infinitely Variable Transmission (Ivt), 31 Mph (50 Km/H)
Available
E23 Transmission 40k, 26 Mph (40 Km/H)
Standard 40 kph @ 1600 rpm w/grp 48 tires, 40kph @ 1520 rpm w/grp 49 tires
Tires
Rear
Group 48/49 tires available as Singles/Duals
Weights
Tls
25738lb
Hydraulic
Maximum Operating Pressure
2958psi
Available Flow At Front Scvs
33 U.S. gpm (126 L/min)
Scv Control
3, 4 Standard, 5 and 6 Available
Axles
Diameter
Rear Axle Diameters: 3.94 x 100.4 in. (100 x 2550 mm) diameter Available — 3.94 x 110.5 in. (100 x 2808 mm) diameter Available — 3.94 x 118.5 in. (100 x 3012 mm) diameter Available — 4.33 x 100.4 in. (110 x 2550 mm) diameter — Available 4.33 x 118.5 in. (110 x 3012 mm) diameter — Available 4.72 x 100.4 in. (120 x 2550 mm) diameter — Available 4.72 x 118.5 in. (120 x 3012 mm) diameter
1300 Series Mfwd, Tread Range 60 To 88 In. (1524 To 2235 Mm)
Standard
Triple Link Suspension
Front Axle: Triple Link Suspension Plus (TLS), tread range 60 to 88 in. (1524 to 2235 mm) Available Triple Link Suspension Plus (TLS), with front brakes, available with 40 km/h transmissions (standard with 50 km/h transmissions) - Available
Hydraulic
Description
Closed-center, pressure and flow compensated
Main Pump, Axial Piston (Displacement)
63 cc standard 85 cc available
Rated Flow
Rated flow, 63 cc pump 43 U.S. gpm (162 L/min) Rated flow, 85 cc pump 59 U.S. gpm (223.3 L/min) Available flow at a single rear SCV 35 U.S. gpm (132 L/min
Available Flow At A Single Rear Scv
35 U.S. gpm (132 L/min)
Final Drive
Description
Inboard planetary, three pinion
3-Point Hitch
Description
Category 3N, available Premium Front Hitch for use with ground-engaging front implements
Lift Capacities - Standard
11464lb
