Caterpillar 963K Crawler Loader
Dimensions
Dimensions
Ground Clearance
1.55ft in
Maximum Rollback/Dump - Fully Raised
52 degrees/53 degrees
Overall Machine Height - Bucket Fully Raised
212.7in
Overall Machine Length*
275.61in
Overall Machine Width Without Bucket: With Standard Tracks - 550 Mm (21.6 In) Shoes
94.5in
Ramp Angle
29 degrees
Reach At Full Lift Height And 45 Degrees Dump*
54in
Note
*With General Purpose bucket and extra duty teeth.
Bucket Height - Carry Position
18in
Carry Position Approach Angle
15 degrees
Clearance At Full Lift Height And 45 Degrees Dump*
114.8in
Digging Depth*
5.4in
Grading Angle
63 degrees
Machine Height - Top Of Cab
130.9in
Maximum Rollback - Ground/Carry Position
43 degrees/50 degrees
Height - Bucket Hinge Pin
155.1in
Height - Top Of Stack
115.7in
Undercarriage
Track Gauge
6.07ft in
Track Shoe Width - Standard
22in
Ground Contact Area - Optional Shoe
4013in2
Ground Contact Area - Standard Shoe
4900in2
Ground Pressure - Optional Shoe
11 psi
Ground Pressure - Standard Shoe
9 psi
Ground Pressure(1) - Optional Shoe
11.1 psi
Ground Pressure(1) - Standard Shoe
9.1 psi
Grouser Height - Double Grouser
1.65in
Track On Ground
100in
Track Rollers/Shoes - Each Side
Jul-38
Track Shoe Width - Optional
18in
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Specifications
Engine
Emissions
U.S. EPA Tier 4 Final/EU Stage IV, China Nonroad Stage III, equivalent to Tier 3/Stage IIIA
Engine Model
Cat C7.1 ACERT
Flywheel Power
193hp
Note (1)
All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Net Power - Iso 9249/Sae J1349 (Din)
196hp
Net Power - Iso 9249/Sae J1349
193hp
Operational
Operating Weight
44138lb
Weights
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Operating Weight(1)
44771lb
Buckets
Capacity - General Purpose
3.2yd3
Capacity - Multi-Purpose
2.6yd3
Capacity - Performance Series
3.7yd3
Width - General Purpose
102.8in
Width - Performance Series
106.8in
Width - Multi-Purpose
101.3in
Service Refill Capacities
Fuel Tank
84.5gal
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Def Tank(1)
4.3gal
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes.
