Caterpillar 914K Wheel Loader
Specifications
Engine
Net Power
96hp
Displacement
231.8cu in
Peak Torque
248lb ft
Torque Rise
17%
Bore
3.9in
Stroke
4.7in
Engine Model
Cat C3.8 Turbo
Note
Engine meets U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards.
Maximum Gross Power - Sae J1995
97hp
Maximum Gross Power - Iso 14396
97hp
Maximum Gross Power
97hp
Rated Net Power - Sae J1349
92hp
Rated Net Power - Iso 9249/Eec
96hp
Rpm At Rated Power
2400rpm
Rated Torque
237lb ft
Rpm At Peak Torque
1500rpm
Operational
Operating Weight
17910lb
Power Train
Front Axle
Fixed
Rear Axle
Oscillating
Type (1)
Power train is fully hydrostatic, operating with twin motors on a gear reduction system to amplify torque.
Type (2)
A built-in clutch on one motor de-clutches at higher speeds to gain maximum travel speed.
Front Axle - Traction Aid
Locking differential
Rear Axle - Oscillation
11 degrees
Rear Axle - Traction Aid
Locking differential
Brakes - Service Brakes
Inboard wet disc
Brakes - Park Brake
Cable applied, spring release
Steering
Steering Type
Steering system uses a dedicated pump with dual double acting cylinders.
Maximum Working Pressure - Steering Pump
3263 psi
Steering Articulation Angle - Each Direction
40 degrees
Steering Cylinder, Double Acting - Bore Diameter
2.4in
Steering Cylinder, Double Acting - Rod Diameter
1.4in
Steering Cylinder, Double Acting - Stroke
15.7in
Maximum Steering Torque - 0 Degrees (Straight Machine)
27369lb ft
Maximum Steering Torque - 39 Degrees (Full Turn)
21593lb ft
Steering Cycle Times - Stop To Stop - At 2,400 Rpm Engine Speed, 90 Rpm Steering Wheel Speed
2.8 s
Number Of Steering Wheel Turns - Stop To Stop, Turning Wheel At > 67 Rpm
3.75 turns
Number Of Steering Wheel Turns - Stop To Stop, Turning Wheel At < 27 Rpm
5.75 turns
Maximum Flow - Steering Pump
22.2 gal/min
Transmission
Type (2)
Creeper control allows maximum speed range adjustability from 0 to 10 km/h (6 mph) in Speed Range 1.
Type (1)
Changing from Low Range to High Range is on-the-go for added convenience.
Forward - Low Range, Speed Range 1
6.3mph
Forward - Low Range, Speed Range 2
12.5mph
Forward - High Range
25mph
Reverse - Low Range, Speed Range 1
6.3mph
Reverse - Low Range, Speed Range 2
12.5mph
Reverse - High Range
25mph
Weights
Operating Weight
17910lb
Tires
Note
Wheel sets are interchangeable between the 910K and 914K.
Weights
Operating Weight - Standard Lift
17910lb
Operating Weight - High Lift
18030lb
Tires
Tire Size - Standard
17.5-25 12PR
Tire Size - Optional (1)
17.5-R25
Tire Size - Optional (2)
17.5-25 16PR
Tire Size - Non-Pneumatic - Flexport
53.5916.5 (15.5/17.525 equivalent)
Buckets
Bucket Capacities
1.2 m3-2.5 m3 (1.6 yd3-3.3 yd3)
General Purpose
1.2-1.5 m3 (1.6-2.0 yd3)
Buckets Type
Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention.
Operating Specifications
Rated Bucket Capacity
3.3yd3
Clearance - Full Lift And 45 Degrees Dump
112ft in
Reach - Full Lift And 45 Degrees Dump
31ft in
Steering Articulation Angle - Each Direction
40 degrees
Full Turn Tip Load
12294lb
Full Turn Tipping Load - Standard Lift
10538lb
Full Turn Tipping Load - High Lift
8603lb
Service Refill Capacities
Cooling System
4.4gal
Fuel Tank
39.6gal
Engine Crankcase
3.4gal
Transmission - Gear Box
0.9gal
Hydraulic System
22.5gal
Hydraulic Tank - Refill
15.9gal
Axle - Front, Center
2gal
Axle - Front, Each Hub
0.6gal
Axle - Rear, Center
2gal
Axle - Rear, Each Hub
0.6gal
Cab
Rops
ROPS: SAE J1040 MAY94, ISO 3471-1994.
Fops
FOPS: SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
Sound
The declared dynamic operator sound pressure level per ISO 6396:2008 is: - Deluxe cab: 75 dB(A)
Loader Hydraulic System
Maximum Working Pressure - Implement Pump
3046 psi
Main Relief Pressure
4061 psi
Maximum Pump Flow
33 gal/min
Maximum Flow - Implement Pump - 3rd Function
25 gal/min
Maximum Flow - Implement Pump - 4th Function
25 gal/min
Cycle Time - Lift
5.3 s
Cycle Time - Dump
1.8 s
Cycle Time - Rackback
2.4 s
Cycle Time - Float
3.7 s
Cycle Time - Lower, Float
4 s
Lift Cylinder - Bore Diameter
3.9in
Lift Cylinder - Rod Diameter
2.4in
Lift Cylinders - Stroke
23.3in
Tilt Cylinder - Bore Diameter
3.9in
Tilt Cylinder - Rod Diameter
2.4in
Tilt Cylinder - Stroke
22.8in
