Caterpillar 730 EJ Articulated Dump Truck
Specifications
Engine
Displacement
763cu in
Bore
5.1in
Stroke
6.2in
Emissions
The 730 EJ meets Tier 4 Final/Stage IV emission standards.
Net Power - Sae J1349
367hp
Gross Power - Sae J1995
375hp
Engine Model
Cat C13 ACERT
Net Power - Iso 14396
370hp
Note (1)
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
Note (2)
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (3)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (4)
Net power when the fan is at maximum speed is 274 kW (367 hp) per the SAE reference conditions.
Note (5)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Peak Engine Torque Gross (Sae J1995)
1579lb ft
Peak Engine Torque Net (Iso 14396)
1564lb ft
Peak Engine Torque Speed
1200rpm
Engine Model - U.S. Epa Tier 4 Final/Eu Stage Iv
Cat C13 ACERT
No Engine De-Rating Below
12500ft in
Transmission
Forward - 1
5mph
Forward - 2
9mph
Forward - 3
14mph
Forward - 4
21mph
Forward - 5
29mph
Forward - 6
34mph
Reverse - 1
6mph
Steering
Lock To Lock
4.75 seconds @ 60 rpm
Weights
Rated Payload
60000lb
Service Refill Capacities
Cooling System
21.9gal
Fuel Tank
108.8gal
Def Tank
5.3gal
Engine Crankcase
10gal
Transmission
12.4gal
Hydraulic System
29.1gal
Final Drives/Differential
33gal
Output Transfer Gear Box
6.3gal
Standards
Cab - Fops
ISO 3449 Level II 2005
Cab - Rops
ISO 3471 2008
Brakes
ISO 3450 2011
Steering
ISO 5010 2007
Operating Weights
Front Axle - Empty
34723lb
Center Axle - Empty
12214lb
Rear Axle - Empty
11707lb
Total - Empty
58643lb
Front Axle - Rated Load
1433lb
Center Axle - Rated Load
29156lb
Rear Axle - Rated Load
29156lb
Total - Rated Load
59745lb
Front Axle - Loaded
35009lb
Center Axle - Loaded
41502lb
Rear Axle - Loaded
41017lb
Total - Loaded
117528lb
Sound Levels
Interior Cab
72 dB(A)
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Turning Circle
Note
Dimensions are for machines equipped with 750/65 R25 tires.
Turning Dimensions - Sae Turning Radius
294in
Turning Dimensions - Clearance Radius
318in
Turning Dimensions - Inside Radius
152in
Turning Dimensions - Aisle Width
214in
Body Capacities
Heaped (Sae 2:1)
22.1yd3
Struck
17.7yd3
Body Plate
Body Plate Type
High strength Brinell HB450 wear resistant steel
Optimal Loader/Truck Pass Matching
Note
An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Hydraulic Excavators: 349f/349f Xe - Passes
45
Hydraulic Excavators: 336f/336f Xe - Passes
56
Wheel Loaders: 972m/972m Xe - Passes
34
Wheel Loaders: 966m/966m Xe - Passes
4
Wheel Loader: 962m - Passes
45
Wheel Loader: 950m - Passes
5
Eject/Retract Times
Eject Time
12 s
Retract Time
15 s
