Caterpillar D6N WH (2016) Crawler Tractor

Crawler Tractor
Crawler Tractor
Crawler Tractor
Crawler Tractor
Crawler Tractor
Crawler Tractor
Units

Dimensions

Dimensions - LGP

E

Ground Clearance

18.8in

G

Track Gauge

85in

Dimensions - XL

E

Ground Clearance

14.3in

G

Track Gauge

74.41in


Specifications

Engine

Displacement

433cu in

Bore

4.1in

Stroke

5.3in

Emissions

Tier 4 Final/Stage IV/Korea Tier 4 Final

Engine Model

Cat C7.1 ACERT

Flywheel Power

182hp

Note (1)

All non road Tier 4, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (EPA), 10 ppm (EU) (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.

Note (2)

Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.

Note (3)

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.

Net Power - 1,800 rpm - ISO 9249/SAE J1349 (DIN)

168hp

Net Power - 1,800 rpm - ISO 9249/SAE J1349

166hp

Net Power - Maximum - ISO 14396 (DIN) at 2,200 rpm

180hp

Net Power - Maximum - SAE J1995 at 2,200 rpm

182hp

Net Power - Maximum - ISO 14396 at 2,200 rpm

178hp

Transmission

1.0 Forward

2.1mph

2.0 Forward

3.6mph

3.0 Forward

6.1mph

1.0 Reverse

2.5mph

2.0 Reverse

4.4mph

3.0 Reverse

7.6mph

1.5 Forward

2.7mph

2.5 Forward

4.7mph

1.5 Reverse

3.4mph

2.5 Reverse

5.9mph

0.5 Forward

1.6mph

0.7 Forward

1.7mph

1.7 Forward

3mph

2.7 Forward

5.2mph

0.5 Reverse

1.9mph

0.7 Reverse

2.1mph

1.7 Reverse

3.7mph

2.7 Reverse

6.5mph

Undercarriage

Ground Pressure

4.5psi

Weights

Operating Weight - XL Waste Handler

40818lb

Operating Weight - LGP Waste Handler

44749lb

Shipping Weight - XL Waste Handler

40029lb

Shipping Weight - LGP Waste Handler

43642lb

Blades - Capacity (SAE J1265)

XL VPAT Landfill*

8.3yd3

XL VPAT

4.3yd3

XL SU

5.6yd3

LGP VPAT - Landfill*

7.4yd3

LGP VPAT

5.1yd3

Note

*Blade capacity with trash rack.

Blades - Width - Over End Bits

XL VPAT Landfill*

10.3ft in

XL VPAT

10.8ft in

XL SU

10.4ft in

LGP VPAT - Landfill*

12.9ft in

LGP VPAT

13.4ft in

Note

*Blade capacity with trash rack.

Dimensions - LGP

Machine Height - Grouser Tip - Exhaust Stack

126.9in

Length - Track on Ground

122.7in

Height - Grouser

2.2in

Ground Clearance

18.8in

Note

*Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line).

Track Gauge

85in

Width - Tractor - Without Trunnions

118in

Length - Basic Tractor - With Drawbar*

166.2in

Dimensions - XL

Length - Track on Ground

101.6in

Ground Clearance

14.3in

Note

*Add 1185 mm (46.7 in) to length of basic tractor (with drawbar) with SU blade added. Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line).

Track Gauge

74.4in

Width - Tractor - Without Trunnions

98.4in

Machine Height - Grouser Tip - Exhaust Stack

122.4in

Length - Basic Tractor - With Drawbar*

157.3in

Height - Grouser

2.6in


Compare similar models

Manufacturer / Model

Ground Pressure

Ground Pressure

4.4 psi

Ground Pressure

4.7 psi

Ground Pressure

4.3 psi
`